NOTE: 1) After replacing the web with a new one, you must execute SP1902-001
(Fusing Web Used Area Display/Setting) to reset the web consumption
count to zero. This SP code must be executed to release SC550.
2) Be sure to print an SMC report before executing Memory All Clear
(SP5801). After executing SP5801, be sure to re-enter the value
recorded for SP1902-001 in the SMC report.
550 A Fusing Web End
Web end detected 5 times within
500 ms and web motor continues to
rotate 40 s. If web end is detected
for another 500 ms, then the SC is
logged.
• Web end (requires replacement)
• Web end sensor defective
Note: After replacing the web with a new
one, reset SP1902 001 to "0" to release
SC550.
110@